A little over a year ago some blog friends and I challenged each other to a “15/15 project”… we wanted to each do a 15 minute DIY that cost under $15. I chose to make a DIY key hook. For some reason I decided to super glue my hooks onto their base, instead of screwing them in, and recently one of them popped off. So I decided to revamp the whole thing a little and now it looks like this:
Supplies for this project are super easy and still super cheap:
- wood scrap
- paint or spray paint
- wall hooks (with screws this time!)
- Velcro or magnetic strip
- 2 shower curtain hooks
- 2 tin containers
I used a piece of scrap wood from when I put up wainscoting in my half bath, the wall hooks are leftover from when I up-cycled some kitchen art, and I had the rest of the supplies on hand because I’m a hoarder. So even with the revamp, I spent $0. I think this whole thing could be done for under $20 though.
The first time I made this I just glued two hooks on the painted piece of wood and called it a day. Now that we’ve been living with it for a year though, I decided to beef it up a bit. I added a third hook (and screwed them all in this time) and two hanging containers. Two of the hooks are for dog supplies (collar, leash, harness), and the third is for our keys.
I apologize for the terrible pictures- it’s in an awkward spot in the kitchen and I had to use the can lights. Also, yes- the two old hooks have peeling spray paint on them and I did not bother to paint the new third hook. It’s like 30* out so I can’t spray paint, and really, this is just for keys. It took about the amount of time my pasta water took to boil, and I wanted to keep it that way. 🙂
The containers came from the dollar spot in Target a while ago, but they seem to always have them- I just used a power drill to drill a hole in each, then looped the shower curtain hook through the hole in and hung it on the wall hook.
I used adhesive Velcro to stick it on the fridge because that’s what I had handy, but you could use a magnetic strip if that’s easier or just screw it into a wall.
Any questions? Leave them in the comments!